Fire doors, while often overlooked in the day-to-day operation of a building, are critical, lifesaving pieces of equipment, so it is absolutely vital to ensure they are properly installed and maintained. There are some simple and effective points to look out for to help ensure your fire door is fully compliant and operates as intended.
Fire Door Certification
Not all doors can simply be allocated as a fire door – the main body of a fire door will have been manufactured and tested to stringent standards to ensure they operate as intended in the event of a fire.
Therefore, only fully certified doors with a CE Mark and third-party certification from schemes such as Certifire, can be classified as fire doors. The label to prove this certification will typically be found on the top of the door, but this can vary between door manufacturers. If this is not present, the performance of the door and its ability to protect building occupants in the event of a fire are not guaranteed, and it should not be considered for use.
Door Closers
For a certified fire door to be effective and legally compliant with Approved Document B of the Building Regulations for England and Wales, it must be able to fully close by itself and remain closed, in order to properly prevent the spread of smoke and fire, as well as provide safe evacuation routes from a building.
As such, door closers must comply with BS EN1154 “Controlled Door Closing Devices” and be CE marked to this standard. Much like with fire doors, the CE mark alone is not enough – closers must also be approved by a third-party scheme, such as Certifire, and should be provided with a Declaration of Performance (DoP) that demonstrates the product has met the required standards.
Of course, the doors should also be able to function properly for building occupants and not be a hindrance. If the doors are too difficult to function, the door is at risk of interference and tampering as occupants may attempt to prop the door open – thus compromising functionality and posing a risk in the event of a fire.
For buildings operating with high footfall levels on a daily basis (such as a tourist attraction), or with peak periods (e.g. a school corridor), a solution that allows a fire door to remain open for longer periods so that occupants can travel easily throughout the building is ideal. Of course, this still must conform to regulations set out in Approved Document B.
For example, the Agrippa Magnetic Door Holder uses a permanent magnet to hold the door open as required. The device ‘learns’ the sound of the fire alarm and will release the door upon hearing it. The wire-free holder is easy to install and can be discretely fitted at the top of the door.
Intumescent Strips, hinges and gaps
Intumescent strips are a further, crucial component of a completely compliant fire door. When exposed to heat, these seals will expand to completely seal the gaps around the door, trapping smoke and flames and preventing danger spreading beyond the door. These must be maintained and kept in good condition.
As a rule of thumb, to check that the door is properly sealed, gaps around the door must be less than 4mm on the sides, and up to a maximum of 8mm below the door.
Hinges must also be properly maintained, as only a properly fitted fire door will function as intended. Therefore, there must be a minimum of three sturdy hinges with all screws intact, fitted to each door.
Fire doors play a critical and live saving role within the fire safety strategy of every building. To help building owners and businesses navigate some of the legislation on this topic, IronmongeryDirect has released its Fire Door Infographic, as a visual reference guide to fire door hardware requirements. It has also released its fire protection guide, that provides more detail on legislation, compliance, and the products required.
2023 Fire Safety eBook – Grab your free copy!
Download the Fire Safety in 2023 eBook, keeping you up to date with the biggest news and prosecution stories from around the industry. Chapters include important updates such as the Fire Safety (England) Regulations 2022 and an overview of the new British Standard for the digital management of fire safety information.
Plus, we explore the growing risks of lithium-ion battery fires and hear from experts in disability evacuation and social housing.