FIRE regulations

A ‘passport’ to fire safety would help solve post-Grenfell challenges

Avatar photo

Fire Safety Consultant

Author Bio ▼

Dr Bob Docherty is a fire safety consultant and fire engineer. He joined the Fire Service in 1968 and started his own business in 2001 after a 33-year tenure in the service. Bob was honoured in the New Years Honours in 2001 with the award of the Queen's Fire Service Medal for his contribution to the Fire Service. He has delivered many papers at conferences and seminars throughout the world and has contributed articles to many technical journals. He has also written the book, Airports and Aircraft, Fire Protection, Firefighting and Rescue Techniques. Bob continues to be active in the field of fire safety/engineering and is the Secretary General for the Institute of Fire Safety Managers. He is involved in the education of fire safety engineers in the UK and abroad, especially at a higher educational level, and he sits on various committees that are linked to this subject. He is also a verifier and contributor to training in industrial fire brigades through JOIFF and lectures to the MSc course in fire safety engineering at the University of Central Lancashire, with particular reference to qualitative risk assessments.
March 23, 2018

Download

Whitepaper: Enhancing security, resilience and efficiency across a range of industries

A fire engineering friend of mine and I have been involved in many debates over many years, both practical and conceptual, on all kinds of fire safety issues.

These have ranged from fire risk assessments (FRAs) in complex buildings to fire engineering design and fire strategies and strategic thinking.

My friend, Paul Bryant, has written many papers and delivered a number of presentations to organisations including the Institute of Fire Safety Managers and last year he shared with me a paper he’d written about his concept of the Holistic Fire Engineer (HFE).

I was fascinated by the concept and it resonated with an idea I had been toying with for a few years. Then came the Grenfell Tower fire and Dame Judith Hackitt’s review of Building Regulations and fire safety. This got me thinking again.

Bickerdike Allen and Partners Report

There have been many attempts to improve both competence and fire safety knowledge in the industry, as well as the processes involved in both new build and refurbished/altered buildings.

If I cast my mind back far enough, I remember the Bickerdike Allen and Partners Report (1990), which examined the interaction of  agencies involved in the design and development of new building projects and  delays in the process. It looked at the technical and practical skills of those involved in the industry and training requirements needed to ensure advice and information was successfully interpreted and acted on.

Today, I suspect we’d call this review a ‘gap analysis’ – and it did find some very big gaps!

Nearly everyone ignored the National Core Curriculum in Fire Studies

One of the outcomes of this report was the production of the National Core Curriculum in Fire Studies. This was supposed to be the ‘holy Grail’ of fire safety, a curriculum that could be inserted into many higher education courses including degrees across the whole of the building sector, from architects to surveyors, building control to fire engineers – and yet for most of those sectors, it didn’t happen.

Nearly everyone ignored it apart from a few likeminded people, mainly from the Institute of Fire Engineers and Institute of Fire Safety. They used it dutifully and diligently to carve the academic pathway to recognised fire engineering and fire safety degrees that are available now.

From prescriptive to risk-based

Since then there has been the introduction of totally new pieces of fire safety legislation, covering all the UK. This legislation was designed quite specifically to reduce regulatory control and the ‘red tape’ burden, as well as define who would be responsible for fire safety protective and preventative measures in any premises.

These pieces of legislation turned the corner from a prescriptive to a more risk-based (assessment) approach and added together with the philosophy of functional requirements of the current Building Regulations, make up the modern-day approach.

The main delivery of fire safety is therefore down to the production and reference to guidance documents from Approved Document B of the Building Regulations in England and Wales, Technical Handbooks in Scotland, various references to British and harmonised Standards, through to the suite of guidance documents produced by the various Governments.

There is plenty of reference material ‘out there’, and plenty used, but at times it isn’t being used in any rational or specific way, and when used, the chances that what has been used is recorded in a standard and sequential way that is understandable (even to those who are in the industry) is minimal.

How hard is it to follow the fire safety history of a building from its concept to reality?

 So, from this background and introduction, I ask the question: How hard is it for fire engineers, fire consultants, fire risk assessors et al to follow the fire safety history of a building from its concept to reality?

Pretty hard in practical terms, I’d say, because there is no formal ‘basket of fire safety information and goodies’ always available. If there is, then more often than not, it’s incomplete and/or not kept up to date.

And yet, it surely must be a fundamental principle of all things fire safety that the design and build and any subsequent changes and alterations to a building must be recorded and referenced!

More rational, formalised pathway

I could go all anecdotal here, but this is not the point of this paper. We all have our tales and ‘nightmare scenarios’ but I want to propose a pathway for the industry to move on in a more rational and formalised way. I also want to tie it into Paul Bryant’s concept of HFE.

From the ‘get go’ a building in its design stage should follow the RIBA plan of work but in the initial stages a fire engineer or fire consultant must be contracted/appointed to work with the architect and design team to give the specialist input needed.

That fire engineer/consultant will be the writer of the fire strategy for the building and this should be in the form of a written report. During this process there must be full consultation with both Building Control or Approved Inspector (BC/AI) and the local fire and recuse service (F&RS).

Once the fire strategy is agreed, the fire engineer/consultant, design team, the BC/AI and F&RS must formally ‘sign off’ the project with full agreement of everyone. This way no one party can say they were not consulted or didn’t agree further down the line.

Once this initial process is complete, then there should be a formal submission through the HFE route. The idea here is that plans etc. would go through independent fire consultants who would act as third-party validators to the project. Paul’s HFE is well documented so I don’t intend to go into detail here, I mention it to show how it can be an integral part of the whole process I am proposing.

The process suggested above would also work for material alterations proposed to an existing building and throughout the lifetime of that building.

Some time ago procedural guidance was produced (although mainly ignored!) which detailed the consultation process and also suggested that a preliminary fire risk assessment (PFRA) should be produced which would inform both BC/AI and the F&RS of how the fire strategy is designed and how it might develop. It could also form an important handover document to the responsible person when the building is completed.

The preliminary fire risk assessment, along with the finished fire strategy will then be used to formulate the emergency plan (EP) for the building – ie, that is how the building will be used to evacuate and this in turn will dictate the evacuation strategy (ES) to be used for the building. Both the EP and ES will be written documents.

Regulation 38 of the building regulations

Now we turn to Regulation 38 of the Building Regulations. I think we are all familiar with what it says and what its intention is, but in practice it’s a nightmare!

I have seen information handed over just about ‘on the back of a cigarette packet’ through to a full 5 volume set of technical specifications! It cannot be beyond someone to design a template that can accommodate the basic information that is required by the responsible person.

Remember this is fire safety information that is handed over to a novice in fire safety matters so needs to be simple, clear and understandable to a layperson.

The final ‘layer’ in all this is the fire risk assessment (FRA), a formal document that sets out the current fire safety preventative and protective measures in a building that is occupied/in use.

The building is built and is now occupied, and we have an accumulated pile of documents:

  • As built plans
  • Fire strategy
  • PFRA
  • EP
  • ES
  • Regulation 38 information
  • FRA

This is the point where I set my proposal. I have thought about the history of ourselves as individuals. We do have a lot of information points in our lives but one which carries, I would suggest, the most data on ourselves is our passport.

We need to update it and renew it on occasions and it records our travel activities, so what about a passport to fire safety for a building? Ok, it doesn’t move but we need to have an identity for it, record information and activities of importance about it and update it from time to time, especially information to do with fire safety.

I would propose that every premises that is built, including dwelling-houses, should have a Passport to fire safety. The passport would be a regulatory provision, every building would need one and it would contain all the information that is listed above.

The information in the passport to fire safety would be updated, added to (new or updated FRA), record changes of use, changes in fire strategy, re-design etc.

The passport to fire safety would stay with the building throughout its life. If this could be done, then the whole fire safety history of the building would be a matter of record.

There would be no more searching for clues or trying to second guess or ‘back engineer’ why the fire strategy of a building looks like it does or why it was built in such a way!

It would become a set of records and information that could be referred to by future architects, fire and rescue personnel, fire risk assessors, fire engineers and anyone else who might get involved in the evolution of the building over its life history.

2023 Fire Safety eBook – Grab your free copy!

Download the Fire Safety in 2023 eBook, keeping you up to date with the biggest news and prosecution stories from around the industry. Chapters include important updates such as the Fire Safety (England) Regulations 2022 and an overview of the new British Standard for the digital management of fire safety information.

Plus, we explore the growing risks of lithium-ion battery fires and hear from experts in disability evacuation and social housing.

FireSafetyeBook-CoverPage-23
Subscribe
Notify of
guest
12 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
Vincent Kain
Vincent Kain
March 23, 2018 2:32 pm

Such a simple yet so powerful solution that could save hundreds of man hours when trying to find the fire safety history of a building. I really hope someone jumps on this and really pushes it forward.

David Pincott
David Pincott
March 23, 2018 2:55 pm

Even passports are lost (or stolen). Where is the passport to be stored and by whom? How can we ensure it is passed on?

Andy Leather
Andy Leather
March 23, 2018 3:01 pm

Spot on as always Bob.

Will Burton
Will Burton
March 23, 2018 3:36 pm

Although i have been in the Fire Industry for a couple of decades or so a recent regulation that i encountered in the PSV industry recommends it self [UN ECE R118]. Briefly it requires a product or system to be tested to the appropriate standard, BUT then is ties this to the Manufacturers QA systens, which it then audits.This thereby closes the discontinuity between test passage and supply to the customer. if nothing else this would give any revised regulatory structure a sound foundation.

D Tierney
D Tierney
March 23, 2018 4:42 pm

Sensible solution to a problem every single organisation who own or inherit a building has. Would this work similar to the construction file for a building or become part of that?

Martin Bainbridge
Martin Bainbridge
March 23, 2018 9:48 pm

Great idea Bob.
Suggest both on site hard copy and cloud based with permissions for viewing or updating, providing resillence in the event of building loss.

John Hill
John Hill
March 25, 2018 11:39 am

The First Bowring risk section had such a document in the days of long ago and far away. Problem was that by the time we got involved, the building was up and the cost of alterations was prohibitive! No amount of pleading and advising produced any change to the system! In later years at a well known SA university a new electrical substation was built. Risk management as prescribed by another faculty was not applied and when the transformers we due to be fitted it was sound that all the protection devices both security and fire related were in the… Read more »

Andrew Floyd
Andrew Floyd
March 25, 2018 6:47 pm

Sot on. It would be part of the Health and Safety file as per CDM2015. (a statutory requirement)Organised and monitored by the Principle Designer and passed on to the building owner.

Bruce Verhei
Bruce Verhei
March 27, 2018 10:04 pm

The need for an operators manual for a building is not limited to largely prescriptive design buildings. An operator’s manual would improve continuity of fire protection and economic utility of a building intended to comply with IBC/IMC/IFC/NFPA70 prescriptive codes, as common in the U.S. Normally you write for an audience. You write in a different manner for third year engineering students than you do for residents of a high rise apartment block. This manual needs to be written for a whole series of users. I’ve been a fire plan review in an industrial town. When asked a question about permitting… Read more »

Michael Ryman
Michael Ryman
March 29, 2018 10:29 am

Well reasoned and clearly identified. A voice of clarity.

Ron
Ron
April 1, 2018 8:44 am

Hi Bob, positively, the only place which reliably stores full life cycle information is the Land Registry, which now stores selling prices.
Negatively, I think the logistics of achieving this are beyond a society which can’t even cope with a ‘now/now/now’ risk assessment. Also, as with the Fire Precautions Act Fire Certificate, once the passport is put in place, most organisations will consider that fire safety is sorted and never give it a 2nd thought.
I think this is a fantastic final outcome to aim for, but we have a long journey to make before we can implement it.

Steve
Steve
April 2, 2018 10:24 am

All good, except the ES must be clear from the outset, it should be the driver to the overall FS, and the EP. All to often the ES is considered only once the building layout is set, this nearly always results in a compromise for someone downstream in the process, and we did have a passport of such for some buildings Fire Certificates, but these were thrown out as out dated and unworkable, while the passport has merit it may not see the light of day as it is another piece of paper to create, maintain and monitor.